Figure 31. Removing a hot swappable hard drive from a hard drive carrier
a. screw (4)
b. hard drive
c. hard drive carrier
Next steps
1. Install the hot swappable hard drive into the hard drive carrier.
2. Install the hot swappable hard drive carrier into the system.
Related tasks
Removing a hot swappable hard drive carrier
on page 71
Installing a hot swappable hard drive into a hot swappable hard drive carrier
on page 73
Installing a hot swappable hard drive carrier
on page 74
Installing a hot swappable hard drive into a hot swappable
hard drive carrier
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
NOTE:
Hot swappable hard drives are supplied in hot swappable hard drive carriers that fit in the hard drive slots.
1. Keep the Phillips #2 screwdriver ready.
2. Remove the hot swappable hard drive carrier.
Steps
1. Insert the hot swappable hard drive into the hard drive carrier with the connector end of the hard drive toward the back.
2. Align the screw holes on the hard drive with the set of screw holes on the hard drive carrier.
When aligned correctly, the back of the hard drive is flush with the back of the hard drive carrier.
3. Attach the screws to secure the hard drive to the hard drive carrier.
Next steps
Install the hard drive carrier into the system.
Installing and removing system components
73
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
