Figure 88. Removing the optional VGA module
1. VGA module
2. control panel
3. hook (2)
4. VGA connector on the control panel board
Next steps
1. Install the VGA module.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Removing the control panel assembly
on page 124
Removing the control panel assembly cover
on page 127
Installing the optional VGA module
on page 133
Installing the optional VGA module
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Align the slots on the VGA module with the VGA connector and hooks on the control panel board.
2. Press the VGA module until the hooks snap into place.
Installing and removing system components
133
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
