support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
4. Remove the cooling shroud.
5. Remove the internal cooling fan.
Steps
1. Align and insert the tabs on the iDRAC port card on the slots on the chassis wall.
2. Insert the iDRAC port card into the connector on the system board.
3. Tighten the screw to secure the iDRAC port card.
Figure 57. Installing the iDRAC port card
1. iDRAC port
2. SD vFlash media card
3. iDRAC port card connector
4. iDRAC port card holder
5. captive screw (2)
Next steps
1. Reconnect all the cables to the iDRAC port card.
2. Install the internal cooling fan.
3. Install the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related tasks
Removing the cooling shroud
on page 65
100
Installing and removing system components
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
