Steps
1. Align the retention hooks on the back wheel unit with the slots on the base of the chassis, and insert the hooks into the slots.
2. Slide the back wheel to the back of the system and secure the unit in place using a screw.
3. Align the retention hooks on the front wheel with the slots on the base of the chassis, and insert the hooks into the slots.
4. Slide the front wheel to the front of the system, and secure the unit in place using a screw.
Figure 16. Installing caster wheels
1. support unit
2. screw for support unit (2)
3. slot on base of the tower (4)
4. wheel assembly unit (2)
5. screw for wheel assembly (2)
Related tasks
Removing the system feet
on page 54
Removing caster wheels
on page 57
Removing caster wheels
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Place the system on a flat and stable surface with the wheels extending beyond the edge of the surface.
Steps
1. Remove the screw that secures the front wheel unit to the base of the chassis.
2. Slide the front wheel unit slightly to the back of the system to release the retention hooks, and pull the front wheel unit.
3. Remove the screw securing the back wheel unit to the base of the chassis.
4. Slide the back wheel unit slightly to the front of the system to release the retention hooks, and pull the back wheel unit.
Installing and removing system components
57
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
