2. Align the edge connector of the memory module with the alignment key of the memory module socket, and insert the memory module
in the socket.
NOTE:
The alignment key allows you to install the memory module in the socket in only one orientation.
CAUTION:
Do not apply pressure at the center of the memory module; apply pressure at both ends of the memory
module evenly.
3. Press the memory module with your thumbs until the socket levers firmly click into place.
Figure 47. Installing the memory module
a. memory module
b. alignment key
c. memory module socket ejector (2)
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in
After working inside your system
on page 52.
3. Press F2 to enter System Setup, and check the
System Memory
setting.
The
System Memory Size
should reflect the installed memory.
4. If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory modules are firmly
seated in the sockets.
5. Run the system memory test in system diagnostics. See
Dell Embedded System Diagnostics
.
Related tasks
Removing the cooling shroud
on page 65
Installing the cooling shroud
on page 66
Cooling fans
The system supports an internal cooling fan.
NOTE:
When selecting or upgrading your system configuration, verify the system power consumption with the Dell
Energy Smart Solution Advisor at Dell.com/ESSA to ensure optimum power utilization.
Installing and removing system components
89
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
