Next steps
1. If removed, install the full-length PCIe card.
2. Follow the procedure listed in the After working inside your system section.
Intrusion switch
Removing the intrusion switch
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Ensure that you follow the
Safety instructions
on page 51.
2. Follow the procedure listed in
Before working inside your system
on page 52.
3. Remove the cooling shroud.
Steps
1. Disconnect the intrusion switch cable from the intrusion switch connector on the system board.
2. Press the intrusion switch and slide it out of the intrusion switch slot.
Figure 26. Removing the intrusion switch
1. intrusion switch slot
2. intrusion switch
3. intrusion switch cable
4. intrusion switch connector on the system board
Installing and removing system components
67
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
