Next steps
1. Install the four-slot hard drive blank.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Removing the cooling shroud
on page 65
Removing a hot swappable hard drive from a hard drive carrier
on page 72
Removing the hard drive backplane
on page 79
Installing a four-slot hard drive blank
on page 84
Installing a four-slot hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Locate the hard drive slots numbered from four to seven.
2. Insert the four-slot hard drive blank into the hard drive slot, and push it until the release tabs click into place.
Figure 44. Installing the four-slot hard drive blank
a. four-slot hard drive blank
b. release tab (4)
Next steps
1. Install the x8 hard drive backplane.
2. Install all hard drives.
3. Install the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
84
Installing and removing system components
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
