Next steps
1. Install the intrusion switch.
2. Follow the procedure listed in
After working inside your system
on page 52 .
Related tasks
Removing the cooling shroud
on page 65
Installing the intrusion switch
on page 68
Installing the intrusion switch
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Ensure that you follow the
Safety instructions
on page 51.
2. Follow the procedure listed in
Before working inside your system
on page 52.
Steps
1. Slide the intrusion switch into the intrusion switch slot.
2. Connect the intrusion switch cable to the intrusion switch connector on the system board.
Figure 27. Installing the intrusion switch
1. intrusion switch slot
2. intrusion switch
3. intrusion switch cable
4. intrusion switch connector on the system board
68
Installing and removing system components
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
