Removing the internal cooling fan
on page 90
Installing the internal cooling fan
on page 90
Installing the cooling shroud
on page 66
Internal dual SD module (optional)
The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following features:
•
Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE:
When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the
information is replicated from one SD card to another.
•
Single card operation — single card operation is supported, but without redundancy.
Removing an (optional) internal SD card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Locate the SD card slot on the internal dual SD module and press the card to release it from the slot.
NOTE:
Temporarily label each SD card with its corresponding slot number before removal. Re-install the SD card(s)
into the corresponding slots.
2. Lift the SD card away from the internal dual SD module.
Figure 58. Removing internal SD card.
1. Internal Dual SD module
2. SD card 1
Installing and removing system components
101
Summary of Contents for E35S001
Page 2: ......
Page 164: ...164 Getting help ...
