deduplication cache holds references to unique blocks. By default, the deduplication cache is 1.5 GB. If
the amount of redundant information isso large that the deduplication cache is full, your repository can
no longer take full advantage of further deduplication across your repository for newly added data. You
can then increase the size of the deduplication cache by changing the deduplication cache configuration
in the Core Console.
To configure deduplication cache settings:
1.
Navigate to the Core Console, click
Configuration
→
Settings
.
2.
In the
Deduplication Cache Configuration
section, click
Change
.
The
Deduplication Cache Configuration
dialog box appears.
3.
In the
Primary Cache Location
text box, enter the updated primary cache location.
4.
In the
Secondary Cache Location
text box, enter the updated secondary cache location.
5.
In the
Metadata Cache Location
text box, enter the updated metadata cache location.
6.
Click
OK
.
NOTE: You must restart the Core service for the changes to take effect.
Modifying engine settings
To modify engine settings:
1.
Navigate to the Core Console, click
Configuration
→
Settings
.
2.
In the
Replay Engine Configuration
section, click
Change
.
The
Replay Engine Configuration
dialog box appears.
3.
In the
Replay Engine Configuration
dialog box, specify the
IP address
. Select one of the following:
• To use the preferred IP address from your TCP/IP, click
Automatically Determined
.
• To manually enter an IP address, click
Use a specific IP Address
.
4.
Enter the configuration information described as follows:
Text Box
Description
Preferable Port
Enter a port number or accept the default setting (8007 is the default port).
The port is used to specify the communication channel for the engine.
Admin Group
Enter a new name for the administration group. The default name is BUILTIN
\Administrators.
Minimum Async
I/O Length
Enter a value or choose the default setting. It describes the minimum
asynchronous input/output length. The default setting is 65536.
Receive Buffer
Size
Enter an inbound buffer size or accept the default setting. The default setting is
8192.
Send Buffer Size
Enter an outbound buffer size or accept the default setting. The default setting
is 8192.
Read Timeout
Enter a read timeout value or choose the default setting. The default setting is
00:00:30.
Write Timeout
Enter a write timeout value or choose the default setting. The default setting is
00:00:30.
5.
Select
No Delay
.
19
