Text Box
Description
Virtual Machine
Enter a name for the virtual machine being created; for example,
VM-0A1B2C3D4.
NOTE: The default name is the name of the source machine.
Version
Specify the version of VMware Workstation for the virtual machine. You can
choose from:
• VMware Workstation 7.0
• VMware Workstation 8.0
• VMware Workstation 9.0
Memory
Specify the memory for the virtual machine by clicking one of the following:
• Use the same amount of RAM as the source machine - To specify that the
RAM configuration is the same as the source machine.
• Use a specific amount of RAM - To specify how much RAM to use; for
example, 4096 Megabytes (MB). The minimum amount allowed is 512 MB
and the maximum is determined by the capability and limitations of the
host machine.
5.
Select
Perform initial ad-hoc export
to perform the virtual export immediately instead of after the
next scheduled snapshot.
6.
Click
Next
.
7.
On the
Volumes
page, select the volumes to export, for example, C:\ and D:\, click
Next
.
8.
On the
Summary
page, click
Finish
to complete the wizard and to start the export.
NOTE: You can monitor the status and progress of the export by viewing the
Virtual Standby
or
Events
tab.
Exporting Windows data using Hyper-V export
In AppAssure, you can choose to export data using Hyper-V Export by performing a one-time or
continuous export. Complete the steps in the following procedures to export using Hyper-V Export for
the appropriate type of export.
Performing a one-time Hyper-V export
To perform a one-time Hyper-V export:
1.
In the Core Console, navigate to the machine you want to export.
2.
On the Summary tab, click
Actions
→
Export
→
One-time
.
The
Export Wizard
displays on the
Protected Machines
page.
3.
Select a machine for export, and then click
Next
.
4.
On the
Recovery Points
page, select the recovery point that you want to export, and then click
Next
.
64
