Dell DL1000 User Manual Download

Page: 90 / 98

NOTE: Removing a source core results in the removal of all replicated machines that are protected
by that core.

Removing a protected machine from replication on the source Core

To remove a protected machine from replication on the source core:

From the source core, open the Core Console, and click the

Replication

tab.

Expand the

Outgoing Replication

section.

In the drop-down menu for the protected machine that you want to remove from replication, click

Delete

In the

Outgoing Replication

dialog box, click

Yes

to confirm deletion.

Removing a protected machine on the target Core

To remove a protected machine on the target core:

On the target core, open the Core Console, and click the

Replication

tab.

Expand the

Incoming Replication

section.

In the drop-down menu for the protected machine that you want to remove from replication, click

Delete

, and then select one of the following options.

Option

Description

Relationship Only

Removes the protected machine from replication but retains the replicated
recovery points.

With Recovery
Point

Removes the protected machine from replication and deletes all replicated
recovery points received from that machine.

Removing a target Core from replication

To remove a target core from replication:

On the source core, open the Core Console, and click to the

Replication

tab.

Under

Outgoing Replication

, click the drop-down menu next to the remote core that you want to

delete, and click

Delete

In the

Outgoing Replication

dialog box, click

Yes

to confirm deletion.

Removing a source Core from replication

NOTE: Removing a source core results in the removal of all replicated agents protected by that

core.

To remove a source core from replication:

On the target core, open the Core Console, and click the

Replication

tab.

Under

Incoming Replication

, in the drop-down menu, click

Delete

, and then select one of the

following options.

Summary of Contents for DL1000



































































































Search results

Summary of Contents for DL1000

Reviews:

Related manuals for DL1000

Brands by name

Popular brands

Dell DL1000, User Manual

Search results

Summary of Contents for DL1000

Reviews:

Related manuals for DL1000

Brands by name

Popular brands