Dell DL1000 User Manual Download

Page: 93 / 98

NOTE: When you launch the restore you must use the recovery points that were imported from
the target core to the agent on the virtual machine.

16.

Wait for the BMR reboot and for the agent service to restart, and then view and record the network
connection details of the machine.

17.

Navigate to the Core Console on the source core, and, on the

Machines

tab, modify the machine

protection settings to add the new network connection details.
For more information,

Configuring Machine Settings

18.

Navigate to the Core Console on the target core, and delete the agent from the

Replication

tab.

19.

In the Core Console of the source core, set up replication again between the source and target by
clicking the

Replication

tab, and then adding the target core for replication.

Summary of Contents for DL1000



































































































Search results

Summary of Contents for DL1000

Reviews:

Related manuals for DL1000

Brands by name

Popular brands

Dell DL1000, User Manual

Search results

Summary of Contents for DL1000

Reviews:

Related manuals for DL1000

Brands by name

Popular brands