Dell DL1000 User Manual Download | Manualshive

Page: 82 / 98

background image

Roadmap for performing replication

To replicate data using AppAssure, you must configure the source and target cores for replication. After
you configure replication, you can then replicate data of the protected machine, monitor and manage
replication, and perform recovery.
Performing replication in AppAssure involves performing the following operations:

• Configure self-managed replication. For more information on replicating to a self-managed target

core, see

Replicating To A Self-Managed Core

.

• Configure third-party replication. Fore more information on replicating to a third-party target core,

see

Replicating To A Core Managed By A Third Party

• Replicate a new protected machine attached to the source core. For more information on replicating

a protected machine, see

Replicating A New Protected Machine

.

• Replicate an existing protected machine. For more information on configuring an agent for

replication, see

Replicating Agent Data On A Machine

.

• Set replication priority for an agent. For more information on prioritizing the replication of agents, see

Setting Replication Priority For An Agent

.

• Monitor replication as needed. For more information on monitoring replication, see

Monitoring

Replication

.

• Manage replication settings as needed. For more information on managing replication settings, see

Managing Replication Settings

• Recover replicated data in the event of disaster or data loss. For more information on recovering

replicated data, see

Recovering Replicated Data

Replicating to a self-managed core

A self-managed core is a core to which you have access, often because it is managed by your company
at an off-site location. Replication can be completed entirely on the source core, unless you choose to
seed your data. Seeding requires that you consume the seed drive on the target core after you configure
replication on the source core.

NOTE: This configuration applies to replication to an off-site location and to mutual replication. The

Core must be installed on all source and target machines. If you are configuring your system for

multi-point to point replication, you must perform this task on all source cores and the one target

core.

Configuring the source core to replicate to a self-managed target core

To configure the source core to replicate to a self-managed target core:

1.

In the Core, click the

Replication

tab.

2.

Click

Add Target Core

.

The

Replication

wizard appears.

3.

Select

I have my own Target Core

, and then enter the information as described in the following

table.

Text Box

Description

Host Name

Enter the host name or IP address of the Core machine to which you are
replicating.

82

«
...
80
81
82
83
84
...
»

Summary of Contents for DL1000



































































































Reviews:

No comments

Related manuals for DL1000

Brand: ABB Pages: 14

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

CYRC50U - UNIVERSAL REAR-VIEW CAMERA

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 54

Brand: AA Products Pages: 6

Brand: Acdeos Pages: 7

Brand: Baicells Pages: 32

Brand: BAFANG Pages: 18

Brand: VANPOWERS Pages: 23

Brand: Dancover Pages: 31

Brand: Labelmate Pages: 2

Brand: Labnet Pages: 2

Brand: Z-Wave Pages: 10

Brand: SECURENET Pages: 12

Brand: GATmatic Pages: 13

Brand: Berkefeld Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands