Dell DL1000 User Manual Download | Manualshive

Page: 84 / 98

background image

Text Box

Description

required for copying the seed drive, but is not reserved immediately after

starting the copying process).

• Select the blank text box, enter an amount, and then select a unit of

measurement from the drop-down list to customize the maximum space

you want to reserve.

Customer ID
(optional)

Optionally, enter the customer ID that was assigned to you by the service
provider.

Recycle action

In the event that the path already contains a seed drive, select one of the
following options:
•

Do not reuse

— Does not overwrite or clear any existing data from the

location. If the location is not empty, the seed drive write fails.

•

Replace this core

— Overwrites any pre-existing data pertaining to this

core but leave the data for other cores intact.

•

Erase completely

— Clears all data from the directory before writing the

seed drive.

Comment

Enter a comment or description of the archive.

Add all Agents to
Seed Drive

Select the agents you want to replicate using the seed drive.

Build RP chains
(fix orphans)

Select this option to replicate the entire recovery point chain to the seed drive.
This option is selected by default.
Typical seeding in AppAssure replicates only the latest recovery point to the
seed drive, which reduces the amount of time and space required for creating
the seed drive. Opting to build recovery point (RP) chains to the seed drive
requires enough space on the seed drive to store the latest recovery points
from the specified agent or agents, and may take additional time to complete
the task.

Use compatible
format

Select this option to create the seed drive in a format that is compatible with
both new and older versions of the AppAssure Core.

10.

On the

Agents

page, select the agents you want to replicate to the target core using the seed drive.

11.

Click

Finish

.

12.

If you created a seed drive, send it to your target core.
The pairing of the source core to the target core is complete. Replication begins, but produces
orphaned recovery points on the target core until the seed drive is consumed and provides the
necessary base images.

Consuming the seed drive on a target core

This procedure is only necessary if you created a seed drive while Configuring Replication For A Self-
Managed Core.
To consume the seed drive on a target core:

1.

If the seed drive was saved to a portable storage device such as a USB drive, connect the drive to the
target core.

2.

From the Core Console on the target core, select the

Replication

tab.

84

«
...
82
83
84
85
86
...
»

Summary of Contents for DL1000



































































































Reviews:

No comments

Related manuals for DL1000

Brand: Unex Pages: 24

Brand: Happy Orange Pages: 2

Brand: T-Tech Pages: 38

Brand: 7AMEnfant Pages: 2

Brand: Dakota Alert Pages: 2

Brand: DAINCUBE Pages: 38

Brand: Gardener's Pages: 2

Brand: Garmin Pages: 26

Brand: Garmin Pages: 8

Brand: Garmin Pages: 72

Brand: Manfrotto Pages: 2

Brand: La Crosse Technology Pages: 6

Brand: RaceChip Pages: 20

Brand: Xerox Pages: 2

Brand: KEDO Pages: 2

Brand: KEDO Pages: 3

Brand: KEDO Pages: 2

Brand: Conrad Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands