Dell Dimension 9150 Owner'S Manual Download

Page: 24 / 150

Setting Up and Using Your Computer

www

.dell.com | support.dell.com

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTICE:

Plug the network cable into the network adapter connector on the computer. Do not plug the

network cable into the modem connector on the computer. Do not plug a network cable into a telephone
wall jack.

Connect the network cable to the network adapter connector on the back of your computer.

Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

Connect the other end of the network cable to a network device.

Network Setup Wizard

The Microsoft

Windows

XP operating system provides a Network Setup Wizard to guide you

through the process of sharing files, printers, or an Internet connection between computers in a
home or small office.

Click the

Start

button, point to

All Programs

→

Accessories

→

Communications

, and then

click

Network Setup Wizard

On the welcome screen, click

Click

Checklist for creating a network

NOTE:

Selecting the connection method

This computer connects directly to the Internet

enables the

integrated firewall provided with Windows XP Service Pack.

Complete the checklist and required preparations.

Return to the Network Setup Wizard and follow the instructions on the screen.

network device

network adapter connector on computer

network cable

network adapter
connector

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands