Dell Dimension 9150 Owner'S Manual Download

Page: 49 / 150

Solving Problems

Sound and Speaker Problems

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

No sound from speakers

NOTE:

The volume control in some MP3 players overrides the Windows volume setting. If you have been

listening to MP3 songs, ensure that you did not turn the player volume down or off.

ESTART

THE

COMPUTER

AND

TRY

THE

SCANNER

AGAIN

HECK

THE

CABLE

CONNECTIONS

—

• See the scanner documentation for cable connection information.
• Ensure that the scanner cables are securely connected to the scanner and the computer.

ERIFY

THAT

THE

SCANNER

RECOGNIZED

ICROSOFT

INDOWS

—

Click the

Start

button, click

Control Panel

, and then click

Printers and Other Hardware

Click

Scanners and Cameras

If your scanner is listed, Windows recognizes the scanner.

EINSTALL

THE

SCANNER

DRIVER

—

See the scanner documentation for instructions.

HECK

THE

SPEAKER

CABLE

CONNECTIONS

—

Ensure that the speakers are connected as shown on

the setup diagram supplied with the speakers. If you purchased a sound card, ensure that the speakers
are connected to the card.

NSURE

THAT

THE

SUBWOOFER

AND

THE

SPEAKERS

ARE

TURNED

—

See the setup diagram

supplied with the speakers. If your speakers have volume controls, adjust the volume, bass, or treble to
eliminate distortion.

DJUST

THE

INDOWS

VOLUME

CONTROL

—

Click or double-click the speaker icon in the lower-right

corner of your screen. Ensure that the volume is turned up and that the sound is not muted.

ISCONNECT

HEADPHONES

FROM

THE

HEADPHONE

CONNECTOR

—

Sound from the speakers is

automatically disabled when headphones are connected to the computer’s front-panel headphone
connector.

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands