Dell Dimension 9150 Owner'S Manual Download

Page: 116 / 150

116

Appendix

www

.dell.com | support.dell.com

Entering System Setup

Turn on (or restart) your computer.

When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.

Once this F2 prompt appears, press <F2> immediately.

NOTE:

The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so

you must watch for it to display, and then press <F2>. If you press <F2> before you are prompted, this
keystroke will be lost.

If you wait too long and the operating system logo appears, continue to wait until you see the
Microsoft

Windows

desktop. Then, shut down your computer (see page 63) and try again.

System Setup Screens

The system setup screen displays current or changeable configuration information for your
computer. Information on the screen is divided into three areas: the options list, active options
field, and key functions.

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands