Dell Dimension 9150 Owner'S Manual Download

Page: 120 / 150

120

Appendix

www

.dell.com | support.dell.com

Power Management

AC Recovery

Determines what happens when AC power is restored to the computer.

Auto Power On

Sets the computer to automatically turn on. Choices are

every day

or every

Monday through Friday

The default setting is

Off

This feature does not work if you turn off your computer using a power strip
or surge protector.

Auto Power Time

Sets time to automatically turn on the computer.

Time is kept in the standard 12-hour format (

hours:minutes

). Change the

startup time by pressing the right- or left-arrow key to increase or decrease
the numbers, or type numbers in both the date and time fields.

This feature does not work if you turn off your computer using a power strip
or surge protector.

Low Power Mode

When

Low Power Mode

is selected, remote wakeup events no longer power

up from

Hibernate

Off

Remote Wake Up

This option allows the computer to power up when a NIC or Remote
Wakeup-capable modem receives a wake up signal.

is the default setting.

On w/ Boot to NIC

allows the computer to

attempt to boot from a network prior to using the boot sequence.

NOTE:

Normally, the system can be powered up remotely from suspend mode,

hibernate mode, or when powered off. When

Low Power Mode

(in the

Power

Management

menu) is enabled, the computer can only be powered up

remotely from

Suspend

Suspend Mode

The options are

, a suspend state where the computer is running in a low-

power mode, and

, a standby state where the power is reduced or turned

off for most components, however, system memory remains active.

Maintenance

CMOS Defaults

This setting restores the computer’s default settings.

Event Log

Displays the system event log.

POST Behavior

Fastboot

When set to

(default), your computer starts more quickly because it

skips certain configurations and tests.

Numlock Key

This option involves the rightmost bank of keys on your keyboard. When set
to

(default), this option activates the numeric and mathematical

features shown at the top of each key. When set to

Off

, this option activates

the cursor-control functions labeled on the bottom of each key.

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands