Dell Dimension 9150 Owner'S Manual Download

Page: 23 / 150

Setting Up and Using Your Computer

Connecting a TV

NOTE:

To connect a TV to your computer, you must purchase an S-video cable, which is available at

most consumer electronics stores. An S-video cable is not included with your computer.

Follow the procedures in "Before You Begin" on page 63.

Connect one end of the S-video cable to the TV-OUT connector on the back of the computer.

Connect the other end of the S-video cable to the S-video input connector on your TV.

Connect the VGA or DVI monitor.

Changing the Display Settings

After you connect the monitor(s) or TV, turn on the computer.

The Microsoft

Windows

desktop displays on the primary monitor.

Enable clone mode or extended desktop mode in the display settings.

•

In clone mode, both monitors display the same image.

•

In extended desktop mode, you can drag objects from one screen to the other, effectively
doubling the amount of viewable work space.

For information on changing the display settings for your graphics card, see the user’s guide in the
Help and Support Center (click the

Start

button, click

Help and Support

, click

User and system

guides

, click

Device guides

, and then click the guide for your graphics card).

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands