Dell Dimension 9150 Owner'S Manual Download

Page: 99 / 150

Removing and Installing Parts

Connect the power and hard drive cables to the drive.

Check all connectors to be certain that they are properly cabled and firmly seated.

Replace the computer cover (page 110).

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into

the computer.

Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software
required for drive operation.

Floppy Drive

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet

before opening the cover.

NOTE:

If you are adding a floppy drive, see ""Installing a Floppy Drive" on page 101."

Removing a Floppy Drive

Follow the procedures in "Before You Begin" on page 63.

Remove the computer cover (see page 68).

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands