Dell Dimension 9150 Owner'S Manual Download

Page: 62 / 150

Troubleshooting Tools

www

.dell.com | support.dell.com

On the next screen, click

Confirm

The restore process takes approximately 6–10 minutes to complete.

When prompted, click

Finish

to reboot the computer.

NOTE:

Do not manually shut down the computer. Click

Finish

and let the computer completely reboot.

When prompted, click

Yes

The computer restarts. Because the computer is restored to its original operating state, the
screens that appear, such as the End User License Agreement, are the same ones that
appeared the first time the computer was turned on.

Click

The

System Restore

screen appears and the computer restarts.

After the computer restarts, click

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands