Dell Dimension 9150 Owner'S Manual Download

Page: 16 / 150

Setting Up and Using Your Computer

www

.dell.com | support.dell.com

Playing CDs and DVDs

NOTICE:

Do not press down on the CD or DVD tray when you open or close it. Keep the tray closed when

you are not using the drive.

NOTICE:

Do not move the computer when you are playing CDs or DVDs.

Press the eject button on the front of the drive.

Place the disc, label side up, in the center of the tray.

Press the eject button or gently push in the tray.

To format CDs for storing data, to create music CDs, or to copy CDs, see the CD software that
came with your computer.

NOTE:

Ensure that you follow all copyright laws when you create CDs.

A CD player includes the following basic buttons:

Play

Move backward within the current track

Pause

Move forward within the current track

Stop

Go to the previous track

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands