Dell Dimension 9150 Owner'S Manual Download

Page: 90 / 150

Removing and Installing Parts

www

.dell.com | support.dell.com

Drive Panels

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet

before removing the cover.

Removing the Drive Panel

Follow the procedures in "Before You Begin" on page 63.

Grasping the lever on the sliding plate, pull the sliding plate to the right and hold in place.

NOTE:

The sliding plate secures and releases the drive panel and helps to secure the drives.

drive panel

sliding plate

sliding plate lever

Summary of Contents for Dimension 9150























































































































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Owner'S Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands