background image

Contents

      i

Contents

Chapter 1. About this manual ................................................ 1

Important

 

Safety Information ...................................................................... 1

Important information about replacing RoHS compliant FRUs .. 2

Chapter 2. Safety information ................................................ 3

General safety ....................................................................................................... 3
Electrical safety .................................................................................................... 4
Safety inspection guide ................................................................................... 6
Handling electrostatic discharge-sensitive devices  ......................... 7
Grounding requirements  ............................................................................... 7
Safety notices ........................................................................................................ 8

Chapter 3. General information ...........................................11

Specifications ..................................................................................................... 11

Chapter 4. General Checkout ...............................................12

Problem determination tips  ...................................................................... 13

Chapter 5. Using the Setup Utility ......................................15

Starting the Setup Utility program ......................................................... 15
Viewing and changing settings ................................................................ 15
Using passwords .............................................................................................. 16
Using Device ...................................................................................................... 18
Selecting a startup device ........................................................................... 19
Exiting from the Setup Utility program ................................................ 20

Summary of Contents for 3000 H305

























































Reviews: