Dell Dimension 5150C Owner'S Manual Download Page 93

Page: 93 / 132

Removing and Installing Parts

Properly dispose of the old battery. See the

Product Information Guide

for battery disposal

information.

Replacing the Computer Cover

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions

located in the

Product Information Guide

Ensure that all cables are connected, and fold cables out of the way.

Gently pull the power cables toward you so that they do not get caught underneath the drives.

Ensure that no tools or extra parts are left inside the computer.

Install the cover:

Align the bottom of the cover with the tabs located along the bottom of edge of the
computer.

Using the tabs as leverage, rotate the cover downward.

Snap the cover into place by pulling back on the cover release latch, and then releasing
the latch when the cover is properly seated.

Ensure that the cover is seated correctly before moving the computer to the upright
position.

NOTICE:

To connect a network cable, first plug the cable into the network device and then plug it into

the computer.

Connect your computer and devices to electrical outlets, and turn them on.

Summary of Contents for Dimension 5150C





































































































































Search results

Summary of Contents for Dimension 5150C

Reviews:

Related manuals for Dimension 5150C

Brands by name

Popular brands

Dell Dimension 5150C, Owner'S Manual

Search results

Summary of Contents for Dimension 5150C

Reviews:

Related manuals for Dimension 5150C

Brands by name

Popular brands