Dell Dimension 5150C Owner'S Manual Download Page 14

Page: 14 / 132

Setting Up and Using Your Computer

Connecting a USB Printer

NOTE:

You can connect USB devices while the computer is turned on.

Complete the operating system setup, if you have not already done so.

Install the printer driver if necessary. See the documentation that came with your printer.

Attach the USB printer cable to the USB connectors on the computer and the printer. The
USB connectors fit only one way.

Using a Media Card Reader (Optional)

Use the Media Card Reader to transfer data directly to your computer.

The Media Card Reader supports the following memory types:

•

xD-Picture Card

•

SmartMedia (SMC)

•

CompactFlash Type I and II (CF I/II)

•

MicroDrive Card

•

SecureDigital Card (SD)

•

MultiMediaCard (MMC)

•

Memory Stick (MS/MS Pro)

USB printer cable

USB connector on computer

USB connector
on printer

Summary of Contents for Dimension 5150C





































































































































Search results

Summary of Contents for Dimension 5150C

Reviews:

Related manuals for Dimension 5150C

Brands by name

Popular brands

Dell Dimension 5150C, Owner'S Manual

Search results

Summary of Contents for Dimension 5150C

Reviews:

Related manuals for Dimension 5150C

Brands by name

Popular brands