Dell Dimension 2010, Service Manual

Page: 27 / 78

PCI and PCI Express Cards
27
6 If you are removing the card permanently, install a filler bracket in the
empty card-slot opening.
NOTE:
Installing filler brackets over empty card-slot openings is necessary to
maintain FCC certification of the computer. The brackets also keep dust and
dirt out of your computer.
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 16).
8
Connect the computer and devices to electrical outlets, and then turn
them on.
9
Remove the card’s driver from the operating system.
10
To complete the removal procedure, see "Configuring Your Computer
After Removing or Installing a PCI/PCI Express Card" on page 30.
Replacing PCI and PCI Express Cards
1 Follow the procedures in "Before You Begin" on page 11.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 15).
3 Prepare the card for installation.
1 PCI Express x16 card 2 PCI Express x16 card connector
3 securing tab 4 retention mechanism
2
1
4
3
book.book Page 27 Monday, November 19, 2012 11:42 AM