16
Computer Cover
4
Release the computer cover by pulling it away from the front of the
computer and lifting it up.
5
Set the cover aside in a secure location.
NOTE:
To remove the computer cover on the other side, lay the computer on its
side with the unremoved cover facing up, and then perform step 3 to step 5.
Replacing the Computer Cover
1
Ensure that all cables are connected, and fold cables out of the way.
2
Ensure that no tools or extra parts are left inside the computer.
3
Align the tabs at the bottom of the computer cover with the slots located
along the edge of the computer.
4
Press the computer cover down and slide it towards the front of the computer
until you feel a click or feel the computer cover securely installed.
1
front of computer
2
computer cover
3
screws (2)
3
2
1
book.book Page 16 Monday, November 19, 2012 11:42 AM
Summary of Contents for Dimension 2010
