Drives
35
6
Slide the Media Card Reader out through the front of the computer.
7
Replace the front bezel (see "Replacing the Front Bezel" on page 20).
8
Replace the computer cover on both the sides (see "Replacing the
Computer Cover" on page 16).
9
Connect your computer and devices to electrical outlets, and then turn
them on.
Replacing a Media Card Reader
1
Follow the procedures in "Before You Begin" on page 11.
2
Remove the computer cover from both the sides (see "Removing the
Computer Cover" on page 15).
3
Remove the front bezel (see "Removing the Front Bezel" on page 19).
4
If this is a new Media Card Reader installation, remove the break-away
metal plate.
book.book Page 35 Monday, November 19, 2012 11:42 AM
Summary of Contents for Dimension 2010
