Dell Dimension 2010 Service Manual Download Page 58

Page: 58 / 78

Processor

Set the processor lightly in the socket and ensure that the processor is

positioned correctly.

Pivot the socket release lever back toward the socket, and snap it into place

to secure the processor.

Clean the thermal grease from the bottom of the heat sink.

CAUTION:

Ensure that you apply new thermal grease. New thermal grease is

critical for ensuring adequate thermal bonding, which is a requirement for optimal
processor operation.

Apply the new thermal grease to the top of the processor.

Replace the processor fan and heat sink assembly (see "Replacing the

Processor Fan and Heat Sink Assembly" on page 53).

CAUTION:

Ensure that the processor fan and heat sink assembly is correctly

seated and secure.

Replace the computer cover (see "Replacing the Computer Cover" on

page 16).

book.book Page 58 Monday, November 19, 2012 11:42 AM

Summary of Contents for Dimension 2010















































































Search results

Summary of Contents for Dimension 2010

Reviews:

Related manuals for Dimension 2010

Brands by name

Popular brands

Dell Dimension 2010, Service Manual

Search results

Summary of Contents for Dimension 2010

Reviews:

Related manuals for Dimension 2010

Brands by name

Popular brands