Dell C600 - Latitude Intel P-4 1.4GHz User Manual Download Page 33

Page: 33 / 188

If you encounter resistance when inserting it, do not force the card. Check the card's orientation and try
again.

NOTE: Use a ZV PC Card in the lower connector only.

PC Card Blanks

Save the blank to use whenever you do not have a PC Card installed. The blank protects the PC Card
connector from dust and other particles.

Removing PC Cards and Blanks

NOTICE: If you are using Windows 98 or Windows 2000, use the PC Card configuration

utility on the taskbar to select and stop a card before you remove it. If you do not stop

the card using the configuration utility, you could lose data from open application

programs.

Stop the PC Card by using the PC Card configuration utility on the taskbar.

Rotate the PC Card eject button outward (see step 1 in Figure 9) for the card or blank you want to
eject.

Figure 9. Removing a PC Card

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz





























































































































































































Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands

Dell C600 - Latitude Intel P-4 1.4GHz, User Manual

Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands