Dell C600 - Latitude Intel P-4 1.4GHz User Manual Download Page 21

Page: 21 / 188

Caring for Diskettes

When handling and using diskettes, follow these precautions:

Never use damaged diskettes in the computer
Do not store diskettes near magnetic sources

Removable Mass-Storage Drives

You can install removable-mass storage drive modules such as a CD-ROM drive or SuperDisk drive in the
modular bay.

NOTICE: Follow these precautions when using your drive:

Protect the drives when they are not in the modular bay. Do not squeeze the drive

or place objects on top of it; doing so could damage the drive motor. Keep the

drive as clean as possible.

Do not use the drive while the computer is in motion. Doing so could interrupt the

flow of data between the disc and the hard-disk drive or diskette drive.

For instructions on installing a removable mass-storage drive module in the modular bay, see "

Modular

Bay

NOTE: If the computer is docked, turn off the computer and undock it before installing or removing a
drive.

CD-ROM, CD-RW, and DVD-ROM Drives

NOTICE: Always use compressed air to clean the lens in the drive. Never touch the

lens.

To play a disc:

1. Make sure the appropriate drive is

installed in the modular bay

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz





























































































































































































Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands

Dell C600 - Latitude Intel P-4 1.4GHz, User Manual

Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands