Dell C600 - Latitude Intel P-4 1.4GHz User Manual Download Page 143

Page: 143 / 188

Interface

PS/2-compatible

X/Y position resolution

250 counts/sec.@100gf

Size:

Protrudes .5 mm higher than surrounding keycaps

Power:

Supply voltage

5 V ± .5 VDC

Supply current

25 mA (maximum operating for track stick and touch pad combined)

ESD

In accordance with IEC-801-2

Modem

Data/Fax Modem

Optional 3Com® 56K, V.90 Mini PCI Modem 556B. For more
information, see the

online documentation

for the modem.

Data/Fax and NIC Combination
Modem

Optional 3Com 10/100 LAN + 56K, V.90 Mini PCI Modem. For more
information, see the

online documentation

for the modem.

Supported CD/DVD Formats

CD-ROM red-book audio discs (CD-DA)

CD-ROM yellow-book mode-1 and mode-2 data discs

CD-ROM XA (mode-2 form 1 and form 2; without Adaptive Differential Pulse Code modulation
[ADPCM])

CD-I (mode-2 form 1 and form 2)

CD-I Ready

CD-Bridge

Photo CD, CD-recordable (CD-R) (single and multisession)

Video CD

CD-rewritable (CD-RW) (only the CD-RW drives can write to this type of disc; the CD-ROM and
DVD-ROM drives can read, but not write to, CD-RWs)

DVD-5 (the DVD-ROM drive supports the DVD-5 format)

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz





























































































































































































Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands

Dell C600 - Latitude Intel P-4 1.4GHz, User Manual

Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands