Dell C600 - Latitude Intel P-4 1.4GHz User Manual Download Page 105

Page: 105 / 188

Save and close any open files, exit any open application programs, and shut
down the computer.

Remove the drive from the

modular bay

Reinstall the drive.

Reboot the computer. Does the drive access light blink during the boot routine?

Yes

Go to step 6.

Go to step 5.

Remove and reinsert the drive. Reboot the computer. Does the drive access
light blink during the boot routine?

Yes

Go to step 6.

Go to step 10.

Remove the

hard-disk drive

and boot the computer from a bootable CD. Does

the drive access light blink?

Yes

Go to step 7.

Go to step 10.

Reinstall the hard-disk drive. Then check the

config.sys

file (in Windows 98,

check the CD-ROM or DVD-ROM drive configuration in the

Settings

folder). Is

the appropriate driver installed?

Yes

Go to step 8.

Load the driver, and return to step 1 to begin this procedure again. (To

load the driver, use the

ResourceCD

you received with your Dell

computer.)

Insert a bootable diskette into drive A and reboot the computer.

Type

(where

is the drive) and press <Enter>. Then type

dir

and press

<Enter>. Does MS-DOS display the root directory contents for the drive?

Yes

The problem is resolved.

Go to step 10.

10.

Insert your

ResourceCD

into the drive and reboot the computer. Then run the

IDE Devices

device group. Does your drive pass all the tests?

Yes

Return to step 1 and perform this troubleshooting procedure again. If

you continue to experience trouble,

call Dell

for technical assistance.

Go to step 11.

11.

Call Dell for technical assistance.

Hard-Disk Drive

Basic Checks:

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz





























































































































































































Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands

Dell C600 - Latitude Intel P-4 1.4GHz, User Manual

Search results

Summary of Contents for C600 - Latitude Intel P-4 1.4GHz

Reviews:

Related manuals for C600 - Latitude Intel P-4 1.4GHz

Brands by name

Popular brands