Figure 59. Removing the power distribution board
Next step
1
Install the power distribution board.
Installing the power distribution board
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedures in
Before working inside your system
Steps
1
Align the power distribution board (PDB) with the standoffs on the system.
2
Using a Philips #2 screwdriver, tighten the screws that secure the PDB to the system.
3
Connect the cables to the system board and the drive backplane.
NOTE:
Route the cable properly when you replace it to prevent the cable from being pinched or crimped.
Figure 60. Installing the power distribution board
Disassembly and reassembly
89
