Drive status indicator code
Condition
Flashes green slowly
Drive rebuilding.
Solid green
Drive online.
Flashes green for three seconds, amber for three seconds, and
then turns off after six seconds
Rebuild stopped.
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 12. System health and system ID indicators
System health and system ID indicator
code
Condition
Solid blue
Indicates that the system is turned on, system is healthy, and system ID mode is not active.
Press the system health and system ID button to switch to system ID mode.
Blinking blue
Indicates that the system ID mode is active. Press the system health and system ID button to
switch to system health mode.
Solid amber
Indicates that the system is in fail-safe mode. If the problem persists, see the Getting help
section.
Blinking amber
Indicates that the system is experiencing a fault. Check the System Event Log or the LCD
panel, if available on the bezel, for specific error messages. For more information about error
messages, see the
Dell Event and Error Messages Reference Guide
at
OpenManage software
.
28
Diagnostics and indicators
