7.5 Analogue input pages
7.5.1 Introduction to analogue inputs
You can use an analogue input for the following:
• As an input for one or more controller
analogue functions
.
• As a supervised input for one or more controller
digital functions
.
• To detect
sensor failure
.
• As the basis for one or more
alarms
.
For each analogue input use, the table below shows which
pages
in the analogue input view you must configure.
Table 7.1
Configuration for the uses of an analogue input
Use
Functions*
Sensor setup*
Alarms*
Analogue function(s)
●
●
○
Digital function(s)
●
●
○
Sensor failure
○
●
○
Alarm(s)
○
●
●
*Note: ● represents required configuration. ○ represents optional configuration.
For information on specific functions and hardware characteristics, see the
Designer's handbook
.
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 81 of 213
