8.
Select the
normally open contact
in line 1.
a. Set the
Variable
to
B1
.
b. Select
Save
from the
Functions
menu.
9.
Select the
normally open contact
in line 2.
a. Set the function to
Engine > Inputs > Feedback > Digital running detection
.
b. Select
Save
from the
Functions
menu.
10. Select the
normally open contact
in line 3.
a. Set the function to
Inputs > Terminal(s) x, y, z, Slot #
. (The second digital input configured in
Configure the
output
, step 2.)
b. Select
Save
from the
Functions
menu.
11. Select the
Counter
.
a. Set the
Preset
to
3
.
b. Select
Save
from the
Functions
menu.
12. Add a
Normally closed contact
and a
Normally open coil
to the logic grid and connect them to each other.
13. Select the
normally closed contact
.
a. Set the
Variable
to
TM0.Q
(where TM0 is the timer
ID
).
b. Select
Save
from the
Functions
menu.
14. Select the
normally open coil
.
a. Set the
Variable
to
B1
.
b. Select
Save
from the
Functions
menu.
15. Select
Write
from the right side panel.
Enable CustomLogic
1. Go to
Configure > Parameters
.
2. Enable
CustomLogic
under
Utility > CustomLogic
.
3. Select
Write
from the right side panel.
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 140 of 213