Specifications
83
AT Command Responses
The serial port responses depend on the ATE setting:
Verbose
Terse
OK
0
CONNECT 1
CARRIER
3
ERROR
4
BUSY
7
AT Command Operation
When ATE1 is in effect, there are some addition error
messages such as "Invalid IP address" and "Invalid Entry"
The ATE and ATV settings are saved in non-volatile memory
when the AT&W command is entered, and those settings are
restored when the EtherPath
is reset. The Factory Default setting (main menu, option 6)
for both is ON.
Connections are only allowed when Pin 6 is HIGH or
FORCED HIGH. If not FORCED HIGH, the Pin 6 can be
used to drop a connection. One can also use "+++" then
ATH<cr> to drop a connection.
