EtherPath User’s Guide
36
Chapter 4
Browser Configuration
This Chapter describes how to configure the
EtherPath using a Web Browser. The EtherPath
must have an IP address appropriate to your
network before using this method.
Overview
This configuration method uses your Web Browser to configure the
EtherPath. This provides the most user-friendly interface than the
Telnet/Terminal method.
•
The EtherPath must be installed in your LAN before this
configuration method can be used.
•
Most Browsers will work. The only requirement is that they
support HTML tables and forms.
Connection Procedure
To establish a connection to the EtherPath, follow this procedure:
1.
Install the EtherPath in your LAN as described in Chapter 2.
Ensure that the EtherPath is powered on.
2.
Start your Web browser.
3.
In the
Address
box, enter the following:
http://IP_Address
