EtherPath User’s Guide
82
Appendix C
AT Command
Summary
This Appendix explains the EtherPath's AT
command set operation and responses.
AT Commands
The EtherPath recognizes the following AT commands (when
AT Dialing is enabled):
ATD <IP>
connect to <IP_address>
ATDT <IP>
connect to <IP_address>
ATH[0/1]
on/off hook (ATH<cr> == ATH0)
ATO[0/1]
return to data mode from command mode, if
connected
ATE[0/1]
echo off/on (ATE<cr> == ATE0)
ATS0=[0/1]
switch to Client(0) or Server(1) mode, if not
connected
ATV[0/1]
terse/verbose response (ATV<cr> == ATV0)
ATZ
reset EtherPath (DOES NOT restore factory
defaults)
AT&W
save current settings, including ATE and ATV
AT&Z
reset EtherPath (Same as ATZ)
+++
escape to command mode when connected
