EtherPath User’s Guide
24
it receives an asserted hardware (pin 6) signal or when it receives
an “ATD” command. For a full-time
Nailed-up
connection, use
Hardware
. See Chapter 5, Point-to-Multiple-Point-Mode for use of
the "AT" setting.
RS-485 Mode
Select between 4-wire full duplex and 2-wire half duplex RS-485
mode. For RS-485 operation, the hardware jumpers inside the unit
must be moved from the RS232 to the RS485 position. This setting
is ignored when using RS-232.
