64
Chapter 7
Troubleshooting
This chapter outlines some problems that may
occur during installation operation and some
possible solutions to them.
If you follow the suggested troubleshooting steps and the EtherPath
still does not function properly, please contact your dealer for
further advice.
Hardware Problems
Before anything else, check that all cables used are wired
correctly and properly connected.
If connecting to a 9 pin PC port, a crossover (null
modem) cable is required.
P1
:
All the EtherPath’s LEDs are off.
S1:
Check the power supply or power connection.
P2:
When using 10Base-T cabling, the EtherPath unit does not
work.
S2:
Check the Hub’s link LED for the port to which theEtherPath is
connected. If it is off, make sure the network cable between the
EtherPath and hub is in good condition. You may only use one
of the LAN connections at a time. Make sure the Hub supports
