EtherPath User’s Guide
70
Checking Device Operation
Once the EtherPath is installed on your Network, you can connect to
it using Telnet, to verify its operation. The procedure is as follows.
1.
Leave the EtherPath in its normal operating mode.
2.
Use telnet to connect to the EtherPath with the command:
telnet IP_Address 8000
Where
IP_Address
is the IP Address assigned to the
EtherPath, and 8000 represents the Port number.
•
The port number is “8000” for configuration, but “3000” is
the default for normal operation.
•
If the “Manager IP Addresses” have been entered in the
EtherPath, then only a PC having one of those addresses
can change the configuration.
3.
Choose item 5 (“Display Settings”) from the Main Menu, and
examine the data shown. See Chapter 3 for an explanation of
each of the data items.
