DT9100 B
Sequence of operations
9. If the codes written in for the first and second time are
identical with each other, the device exits the menu item.
You will see this
on the display.
Do not forget the user code you have specified. If you
forget it, defining another one is possible only by using a
supervisor code for entering into the menu.
Returning to the menu
item Changing the user
code
1. As you have already left the menu item
Changing the
user code
, you will see this:
.
(2. If you want to change the setting you have just
performed, or if you just want to check what you have typed
in, continue the operation from
Point 3 of the Sequence of
operations.
)
(3. If you do not want to exit the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
Exit from the menu
1. Press the
MENU
button. First the mnemonic
(
Save
), then the mnemonic
(
Exit
) will be shown on
the display. With that, the storing of the settings is
completed. The instrument has exited the menu and goes
on with the measurement.
34
20180905-V120180905-V1
Summary of Contents for DT9100 B
