42
Control Panel
The Control Panel is a desk mount unit which attaches to the Base Unit via a single (Sub-D 9 pin) cable. The
Control Panel has all of the controls, and a series of set up menus for configuring the SE-900.
When you power up the SE-900 the keys on the control panel will light up. It should look something like this:
You will notice that the CK SYNC, and CK Keys on the Main and Sub Source Rails do not light up during
normal operation, this is intentional.
The LCD display should be in Status Display Mode, and if the Control panel is correctly connected to the
Base Unit the top line of the display should read “
datavideo SE-900 LINKING
”. If this is not the case
please check the connecting cable from the “TO SE 900 MAIN SET” socket on the rear of the Control Panel
is connected to the “TO CONTROLLER” Socket on the rear of the Base Unit.
