35
7. MULTI. IMAGE
Title Values
Description
1: OUTPUT TYPE
YUV / CV
Sets the type of output
2: IMAGE POS.
TOP / BOTTOM
Sets the appearance of the Multi Image
screen (PST / PGM at the top or the bottom of
the layout).
3: SCREEN SIZE
100% / 90% / 80%
Sets the size of the output (100% can only be
used with underscan monitors)
4: NOISE FILTER
LOW / MIDDLE / HIGH /
BYPASS
Sets the level of the video noise filter for the
multi image output
5: BORDER BRIGHT
1 - 100
Sets the brightness of the borders used
around each frame.
6: CAM1_NAME
[ CAM1 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 1.
7: CAM2_NAME
[ CAM2 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 2.
8: CAM3_NAME
[ CAM3 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 3.
9: CAM4_NAME
[ CAM4 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 4.
A: CAM5_NAME
[ CAM5 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 5.
B: CAM6_NAME
[ CAM6 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 6.
C: CAM7_NAME
[ CAM7 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 7.
D: CAM8_NAME
[ CAM8 ]
(Up to 7 Characters)
Allows you to customise the display name of
Input 8.
8. EXT. GENLOCK
This function is not supported at present a future firmware release may be added.
9. SYSTEM
At present the System is not used as all adjustments are covered elsewhere. It may be used with
future firmware releases.
10. CONTROLLER
Title Values
Description
1: LCD CONTRAST
* - - - - - - -
* * * * * * * *
Sets the contrast of the LCD display panel
2: LCD BACK LIGHT
* - - - - - - -
* * * * * * * *
Sets the brightness of the LCD display panel
3: REMOTE MODE
RS 232
RS 232 is the only supported remote mode at
present.
