11
Input & Outputs
The rear panel features a series of input and output slots allowing you to choose the inputs that best suite
your application.
As standard the SE-900 is supplied with the following cards:
Slot 11 - Multi Image Preview Output
This card provides a Composite Video Program Output (PGM), a Composite Video Next Source Output
(PST), and a Component Video Multi Image Preview, which shows all the inputs, next source and program
out on one screen.
Slot 12 - SDI Overlay
This card provides an SDI loop through output for adding an SDI character generator.
Slot 14 - Program Output
This card provides program output, it offers Composite Video, S-Video (Y/C), Component Video (YUV) and
DV Outputs.
Slot 15 - Remote Control
This card provides RS-232C, RS-422 and GPI connections for remotely controlling the SE-900. The card
also features an SD Card which enables firmware updates to be loaded.
These cards form the bare bones system, you will need to add some input cards of your choice.
You may also decide to add any of the following options:
SDI Output
- adds SDI to the available outputs, SDI also features embedded audio.
Chroma Key
- adds a 4 Channel Chroma Keyer. With this you can key green, blue or luma, to create overlay
effects
External Sync
- Allows the SE-900 to be synchronised to an external source. As standard the SE-900 can
synchronise all eight channels internally, so no genlock is necessary, but if you want to synchronise
everything to house sync this card will enable the function.
