36
4: SWITCH COLOR
NO SWAP / SWAP
Sets the colour of the backlight on the
controller
5: SWITCH BRIGHTNESS
* - -
-
* * *
Sets the brightness of the backlight on the
controller
6: TEST KEY
* * *
Goes into keyboard test mode.
In TEST KEY mode values will be displayed for the UP / DOWN Adjustment Knob, Joystick and T Bar
E.G.
U / D
* * * * * * * *
JOY_STICK X = +00 Y = +00
T_BAR = 254
11. STORE & RECALL
Title Values
Description
1: STORE FUNC. KEY
F1 - F10
Used to store transitions to the 10 preset keys.
2: RECALL FROM
USER_1 - USER_3
Recalls settings from one of the three user
memories. All user preferences are recalled.
3: STORE TO
USER_1 - USER_3
Stores all current settings to one of three user
memories. All settings and preferences are
stored.
4: RESET ALL
Press RESET for 2 SEC
Resets the SE-900 to factory defaults.
12. UPDATE FIRMWARE
Title Values
Description
1: NORMAL (RECOMMENDED)
Switches the Audio Delay Circuit On/Off
2: DETAIL
Sets the delay time in either frames or milli-
seconds - according to the setting of 3:
TIME_UNIT
3: READ VERSION
Sets the type of measurement unit according
to your preference
SUB MENUS -
Each of the above menu options have sub-menus as follows:
1: NORMAL (RECOMMENDED)
1: CONTROLLER
Highlight to update the Controller software
2: MAIN BOARD
Highlight to update the Mainboard software
3: INPUT BOARDs (SLOT 1 ~ 8)
Highlight to update the Video Input Boards
software
4: CHROMA KEY BOARD (SLOT 9)
Highlight to update the Chroma Key Board
software
5: OUTPUT BOARDs (SLOT 10 ~ 14)
Highlight to update the Output Boards’
software
6: AUDIO DELAY & TALLY_CTL
Highlight to update the Audio Delay and Tally
software
7: ALL BOARDs
This can take up to 40 minutes and
must not be interrupted.
Highlight to update the software on all of
boards.
